Vorteks 3S 4x4 Fender Flares
Arrma Vorteks 3S 4×4 Body Fender Flares (Set of 4)
Part Number: MS3201
Full set of Fender Flares for the Stock Body of the Vorteks 3S 4×4. These are made out of a strong and flexible material and will strengthen the edges of the body where cracks start to form over time.
Stainless Steel hardware included. You will only need to provide the drill and 1/8” drill bit for the mounting holes.
The best way I have found to install these is to line up the Fender Flare, then drill out the first hole. Place a bolt with a nut to tighten it down. This helps lining it up along the body for later holes. Next, skip the next one or two and drill out another hole. Bolt that one down and then keep going, skipping a couple just to get the main part lined up and mounted. Then go back and drill out the rest of the mounting holes. If you have any questions, please feel free to message me.
Colors Available:
Black, Red, Blue, Green, Orange, White
Compatible With:
Stock Vorteks 3S 4×4 Body
Check out the rest of my shop to find more R/C related products! Made with top quality materials that will last through your hardest bash sessions!
Made in the USA!
Arrma Vorteks 3S 4×4 Body Fender Flares (Set of 4)
Part Number: MS3201
Full set of Fender Flares for the Stock Body of the Vorteks 3S 4×4. These are made out of a strong and flexible material and will strengthen the edges of the body where cracks start to form over time.
Stainless Steel hardware included. You will only need to provide the drill and 1/8” drill bit for the mounting holes.
The best way I have found to install these is to line up the Fender Flare, then drill out the first hole. Place a bolt with a nut to tighten it down. This helps lining it up along the body for later holes. Next, skip the next one or two and drill out another hole. Bolt that one down and then keep going, skipping a couple just to get the main part lined up and mounted. Then go back and drill out the rest of the mounting holes. If you have any questions, please feel free to message me.
Colors Available:
Black, Red, Blue, Green, Orange, White
Compatible With:
Stock Vorteks 3S 4×4 Body
Check out the rest of my shop to find more R/C related products! Made with top quality materials that will last through your hardest bash sessions!
Made in the USA!
Arrma Vorteks 3S 4×4 Body Fender Flares (Set of 4)
Part Number: MS3201
Full set of Fender Flares for the Stock Body of the Vorteks 3S 4×4. These are made out of a strong and flexible material and will strengthen the edges of the body where cracks start to form over time.
Stainless Steel hardware included. You will only need to provide the drill and 1/8” drill bit for the mounting holes.
The best way I have found to install these is to line up the Fender Flare, then drill out the first hole. Place a bolt with a nut to tighten it down. This helps lining it up along the body for later holes. Next, skip the next one or two and drill out another hole. Bolt that one down and then keep going, skipping a couple just to get the main part lined up and mounted. Then go back and drill out the rest of the mounting holes. If you have any questions, please feel free to message me.
Colors Available:
Black, Red, Blue, Green, Orange, White
Compatible With:
Stock Vorteks 3S 4×4 Body
Check out the rest of my shop to find more R/C related products! Made with top quality materials that will last through your hardest bash sessions!
Made in the USA!
